...remove case from singer 7462? I have everything loose except getting it over thread tension control knob I found that by turning the machine over on its back I could lift the front cover from the ...
...Singer 7462? The belt has either broken or come off because you can press on the foot control and hear the motor running, but the Needle or Presser foot does not move. The Bobbin winder shaft is the ...
Question about 7462 Mechanical Sewing Machine
...holding near to the handwheel, I beleave that there is a hidden screw under the handwheel. Try to remove the handwheel and
How is the top cover removed, there are no screws. I need to remove the top cover to attach a new spool pin because the original one broke off when the machine was being transported (it fell over). ...
sewing thru plastic cover both sides with tissue paper, the firm kind,, then sew, remove paper, smaller stiches makes this easier depends on how thick of plastic but you will need to use 'sharp' ...
can someone please tell me how to remove the cover of my singer 384 sewing machine. It is stuck in reverse. take it to a repairman.
Singer Starlet 353 Thread tension thread tension has stopped working. moving the adjustment dial has no effect. I am trying to remove the top/ rear cover to inspect the mechanism but cannot find all ...
...where I sew every day - I need your help - can't wait to hear from you Unthread the machine and remove the bobbin case. Check the bobbin case for any nicks, cuts or burrs and polish them off with ...
...and the flashing lights is a warning message. Nothing serious and your dealer should be able to fix it in 30 minutes. You need to remove the covers and hand wheel, so best to leave it to the ...
...remove the cover for Singer 7462 The covers on computerized sewing machines are not intended to be removed except by technicians. Usually, they are held on by plastic clips that can easily be
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions
