...cover. In the process of checking the lamp and so on I probably did not put it away and now I have lost it! Does any one know where I can buy one? And thank you for the help Aarrowgant.. I went ...
...remove the lamp and then take off the outer cover just as you would to get to the red button. Next carefully unplug the connectors for the fans, speaker, remote sensor, and largest connector on the ...
...remove the cover of the unit. I just opened my Sharp xr-10x DLP projector today, which had no power, no lights, no functions. A previous post worked for me...Remove the 6 screws on the bottom of the ...
Question about XR-10X Multimedia Projector
...remove the existing lamp assembly, it seems to be "stuck" in place. I removed the lamp cover, and then the two screws that hold the lamp assembly in place - but no matter how much I (or anyone else) ...
Question about XR-10X Multimedia Projector
...remove the housing...use a std screwdriver and slightly pry the cover off from the rear of the unit. This should losen allowing you to pivot the cover forward and then off from the projector lens. If ...
Question about XR-10X Multimedia Projector
...remove the housing...use a std screwdriver and slightly pry the cover off from the rear of the unit. This should losen allowing you to pivot the cover forward and then off from the projector lens. If ...
Question about XR-10X Multimedia Projector
...remove these. grab the handle and pull up towards you thus releasing the lamp housing assy. Then place the new lamp and firmly press down and then tighten the two screws that held the lamp assy, then ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions