Question about Lawn Mower With Toro Power Tools
...Remove the drive belt cover from the top of the mower 2. Tip the mower up, being careful to not go too far or the oil and fuels may spill out 3. Remove the mower blade - as I recall the bolt is 5/8" ...
Question about Lawn Mower With Toro Power Tools
...remove it. After removal you will see a pulley with belt around it, as you pull the handle back to engage self propel you should see the pulley move into the belt to put tension on the belt. You can ...
...& 2004 , the gears in the transmission may be stripped.To tell for sure, remove belt cover, start the unit & engage the drive. If the pulley turns & not the axel, the gears are
...remove the drive wheels and check to see if they are stripped out. Replace if nec. Also check to see if any linkage is defective, missing or what ever. If it has a belt check it, replace if nec. Once ...
Question about Lawn Mower With Toro Power Tools
...remove the belt cover on a self propelled lawn mower. It is a El Toro 6.5 GTS. I have removed one bolt but the cover is held or caught on something. Can you tell what I need to do? Thanks, Bob ...
Question about Co M/R Blwr/Trmmr Rear Bag Kit
...it is located on the bottom of the engine you will most likely have to remove the guard that covers the belt if you have self propelled lawn mower and the plug should be under the guard. Good ...
Question about 20360 eCycler 20Inch 36Volt Cordless Electric BaggingMulching Lawn Mower
...remove the front drive and replace the gears ?? I assume there are gears and they are just worn ?? First take the cover off .Then tighten drive cable see if it is loose if it is replace belt .If not ...
Question about Lawn Mower With Toro Power Tools
...a bit of tension. We really do not need the self-propel feature. Thank you! Check for the belt under the cover that drives the mower. If you remove the belt, you will have things the way you
...clicking of pinions occurs. How do I fix the self-propel system? The drive belt is off the pulley, you will need to check under the deck and possibly remove the cover on top of deck to put it back
Question about Power Lawn Mower
Remove plastic cover on front of machine. This will give you a visual on your belt and pulley attached to the transmission. It may be the belt. Check for cracking or glazing on the inside of the belt.
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions