Questions & Answers for: Harley Davidson remove cover Motorcycles

remove the cover. Note: When removing the clutch inspection cover, work carefully to avoid removing or damaging the quad ring in the primary cover. (the quad ring is the o-ring made of square material

...cover. Remove the spring and the locknut. Now, remove any footpegs or anything else that may be in the way of the removal of the outer primary. Loosen the locknut on turn the primary chain tensioner ...

...cover off. Remove the spring and the locknut from the clutch adjusting mechanism. Remove the bolts that hold the outer primary on. Turn the clutch adjuster screw clockwise as you remove the cover. ...

...cover and remove the spring and the locknut. Remove all the bolts holding the cover on and while pulling on the cover gently, turn the clutch adjuster inwards and remove the cover. Good Luck ...

...remove the primary cover from you Sporty, you'll have to remove the shifter and foot peg. Then loosen the locknut for the primary chain adjuster and turn the adjuster downwards to loosen the primary ...

...cover off to remove the broken bolt so that i can replace it. Inspection cover and cover by the clutch cable were also removed, what is holding this cover in place? (Sportster 883xl) You need to ...

...cover. Remove the spring and lock nut underneath the derby cover. Remove the bolts around the primary cover. As you gently pull the primary cover away from the engine, turn the clutch adjuster screw ...

...do i remove the primary cover Hi Anonymous, for more information on your question please visit the websites below and good luck: Stator Repair 1 of 9 Removing Inspection Cover on Outer Primary ...

...I want to remove the hd trim on the battery cover If there is no visible way to remove cover then you may need to pop it off. Try pulling the cover off, be carefull of your knuckles. GOOD LUCK

...Remove cover bolts. If the cover does not come off easily, rap it with a SOFT hammer to break the seal. I do NOT recommend jamming a screwdriver between the case and cover to pry it loose. Should pop ...