Questions & Answers for: Toyota Camry remove cover

Ad

...remove valve cover to replace gasket. valve cover gasket leaking You have to remove the spark plugs cables and remove the four nuts that you see when the cables are removed. When the four nuts are ...

Ad

...cover is to remove the intake plenum. There is really no other way to do it. It is not a hard job, removing the intake plenum, but, trying to tackle the rear cover without taking off the plenum is ...

Ad

Question about 1994 Camry

1 Answer

...remove all 4 of these. Also on the top timing belt cover there are 2 10mm head bolts you will need to back out at least 1/2 way for 2 reasons. 1 to free up the wire harness that crosses there and the ...

...there are plastic covers directly on top of you lug nuts remove with four way or socket clockwise direction these plastic caps will screw off releasing wheel cover. then remove lugs. hope2help ...

...Anything special about removing the cover and replacing the plugs? Thank you They should be in the middle of the valve cover. Remove the cover that is covering them, and you will see the coil

Question about 1990 Camry

1 Answer

...remove valve cover to replace valve cover gasket REMOVAL & INSTALLATION 1C-LTC and 2CL-TC Engines (see Figures 1 and 2) Disconnect the negative battery cable. Remove and label all electrical ...

Remove the cover by pulling it down. Set the cover aside. Locate the two moon-roof-control-cover retaining screws beneath the cover. Insert a Phillips-head screwdriver into one of the screws. Turn the

...Cover and remove CAREFULLY - the wires and any other connectors that are bolted to the Valve Cover. Remove the Valve Cover hold down bolts and nets [some times there are both] then GENTLY tap a screw ...

...COVER LH 6. REMOVE ENGINE UNDER COVER RH 7. REMOVE FRONT FENDER APRON SEAL RH 8. DRAIN ENGINE OIL 10. REMOVE NO. 2 ENGINE MOUNTING STAY RH 11. REMOVE ENGINE MOVING CONTROL ROD SUB-ASSEMBLY 12. REMOVE ...

...cover. Remove the cylinder head cover and the cover gasket from the cylinder head. Discard the gasket and replace with a new one. To install: With a wire brush or gasket scraper, remove all the old ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1995 Toyota Camry
1995 Toyota Camry

1,794 Questions

1994 Toyota Camry
1994 Toyota Camry

1,723 Questions

1998 Toyota Camry
1998 Toyota Camry

1,525 Questions

2002 Toyota Camry
2002 Toyota Camry

1,266 Questions

1996 Toyota Camry
1996 Toyota Camry

1,110 Questions

Manuals & User Guides

Loading...