...remove it because two of the rubber hoses have coolant from the engine in them and if it is hot it could spray you. I sprayed CRC throttle body cleaner on mine and it cleaned it up pretty good. ...
...pump housing cover and the only thing to do is to take it to the auto trans people as it has to be remover and replaced from inside I could be wrong but i dont think so LET ME KNOW HOW YOU GO ...
...remove the ballancer and the timing cover behind the balancer. Once that is off you will see the belt. Make sure when putting the belt on that the marks on the engine are lined up exactly with the ...
cover to remove also to see this. Inspect closely and you should see a burn track or hole from one side of rotor to the other 4 firing ring. It causes backfiring and rough running/starting. To replace
...it you should find an access cover to get to the fuel tank sending unit. (the cover will be SCREWED in place). Remove cover, remove the sending unit and the fuel pump is installed on the sending ...
Usually answered in minutes!
125 Questions
80 Questions
65 Questions
48 Questions
21 Questions