Questions & Answers for: Chevrolet C2500 remove cover

Ad

Question about 1990 C2500

1 Answer

...remove right valve cover Im trying to get to the head because I believe there is a blown head gasket. When I try to take the right valve cover off, it hits the water pump hoses and some other piping ...

Ad

...remove the cover on the master and open the slave and let drip until fluid drops sdteady and no sign of air. Close slave and close master after replenishing the fluid. The first time you press on the ...

Ad

...remove the front cover for the horn and remove the center nut should be able to remove steering wheel by bumping it from the back side. Find the hole on the right side of column near lock cylinder ...

remove plywood that is damaged, use a skill saw set at the minimum depth (thickness of the plywood) so you don't cut thru anything else. Use a drill to determine the thickness. To install new plywood,

...rear covers. Open the tailgate, and you will see the 2 screws which hold each taillight in place. Remove screws, and then pull taillight out carefully - don't break the plastic retainer tab, and it ...

...remove glove box and it is behind there. the s-10 blazer you got to move the cpu, the coolant tank for more room then youll see the outline trace you have to cut the cover off along the dotted lines. ...

Question about 1999 C2500

1 Answer

...remove the cover on the starter relay and check the circuitry for condition and note the state of the solder joints. If you see a dry joint just resolder it. One other area, not electrical, worth ...

...way at least one of the exhaust valves is not seating properly. You could pull the valve covers, remove the rocker arms, and pull each pushrod and check them one by one for straightness to ...

Question about 1998 C2500

1 Answer

...remove it and vac out the enclosure carefuly as to not damage any of the coils or fins in side the air box. put cover back on and see if this is your problem. You should replace the filter ASAP so ...

do i have to remove the diff on a 88 cherolet c2500 to change the spider gears No just remove the cover off of it, End remove both axles, End work from there,

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...