Questions & Answers for: remove camshaft position sensor grand

Question about 1996 Grand Cherokee

2 Answers

...Camshaft Position Sensor. Only available at the dealership and cost $85.00 at the parts counter. Easy to install - remove the distributor cap and rotor. Sensor is a flat disc sitting in distributor ...

Ad

remove the camshaft position sensor from my 1999 jeepcherokee how do I remove the camshaft position sensor from my 1999 jeep grand cherokee 4.7 engine The Camshaft Position Sensor (CMP) on the 4.7L V

Ad

Question about 1996 Grand Voyager

2 Answers

...remove it or in some cases a 7/8" open end wrench will do. P0340 OBD-II Trouble Code Technical Description Camshaft Position Sensor Circuit Malfunction What does that mean? This indicates that a ...

Question about 1995 Grand Cherokee

1 Answer

...include: Clogged catalytic converter - needs replacement or removal. engine timing off - adjust the camshaft position sensor. distributor cap & rotor - replace along with new spark plugs and ...

...camshaft position sensor. Need installation and alignment procedure for reinstalling oil pump driven cam shaft sensor after it has been removed and turned outside of engine. Engine has been turned ...

...Camshaft Position Sensor (CMP) on the 4.7L Vâ??8 engine is bolted to the front/top of the right cylinder head (CMP Locationâ??4.7L Engine). It is easier to remove/install sensor from under ...

remove the camshaft position sensor. It is retained by one bolt and an electrical connector. The special tool requires the removal of the plastic connector from the wires for clearance. Do NOT cut the

Question about 2000 Grand Cherokee

1 Answer

...Camshaft Position Sensor (CMP) on this engine is bolted to the front/top of the right cylinder head. REMOVAL It is easier to remove/install sensor from under vehicle. Raise and support vehicle. ...

Question about 1993 Grand Marquis

1 Answer

...camshaft sensor for removal Charlene, Cam shaft sensor located upper front of engine by idler pulley.Check the attached links,instruction and guides, Good luck "I hope this helped you out, if so let ...

...camshaft position sensor and related components-1996 5.2L engine shown TESTING Make sure that the ignition is OFF , remove the distributor cap and turn the engine over by hand. Verify that the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...