Questions & Answers for: remove box truck bed

...box from the frame. If you remove the tank it is held up with two tank straps and the lines must be unhooked as you lower it. good luck unless you have access to a lift. If you have access to sheet ...

...bed, it should be as low as possible if not empty No smoking Please.. before all that do a pressure test and see if the pump is working.. the tank has to be drained and removed.i would not cut a hole ...

...not work. If you didn't remove the bed, check the relay and fuse up front on the drivers side inner fender fuse box. I'd double check the ground wire at the rear as well just to make sure it's

...Remove the bolts that hold the bed box to the frame, disconnect the rear light wiring harness and the fuel filler pipe. Set up a pair of saw horses or something behind the truck. Then have four guys ...

how to remove bed from 1989 ford 14' box truck 14' box truck There are 6 bolts under the bed going through the frame rail, remove them.

...remove the plastic harness supports along the bottom edge of the truck bed to prevent pulling them out when the truck box is taken off.3Unscrew the hose clamp securing the fuel tank fill-up line to ...

...box bolts,remove thefront bolts & tip up the bed, rather than lay on your back& have to drop the tank & that way you don't have the fuel removal issue,can stand there & just ...

...box under the hood...also check the relay while you are at it. If you take the bed off you will need 2 or more people to help take it off and put it back on . There are only 2 long bolts to drop a ...

...remove the bolts in the box you can tip it up and remove the pump but be sure to brace up the bed so it don't fall on someone, if you decide to pull the box to the rear you will need to take the tail ...

all electrical connections between the frame and box, disconnect the fuel filler hose from the box or the fuel tank, there are 4-6 bolts that mount the truck bed to the frame to remove. move truck bed