Caravan headlight How do I change a headlight on my 2002 Dodge Caravan? Hello, You remove the headlamp assembly by removing the 3 bolts that hold it in place. The bolts are #1 in the following picture
...rotors on 2002 dodge dually. How do the rear rotors on a dodge dually 2002 come off? Remove the axle and outer wheel bearing and pull the assembly off the truck. The rotor is bolted on from the
...bolts to remove the caliper. There are 2 bolts on the "inside" on the caliper towards the bottom they use an allen wrench socket. Be aware that some caravans use hex bolts, others use Allen bolts and ...
...remove Rear wheel bearing 2005 dodge caravan i need to replace the rear wheel bolts because they snapped off when doing my tire rotation, so now i need to replace the bolt but i need to take out the ...
...Remove the 4 bolt that hold the hub onto the backing plate. Reinstall with the new hub and bearing and tighten the bolts. Make sue they are tight replace the brake drum and tire and wheel. Should you ...
...bolts and then pull off and hang of to the side. next remove the brake rotor the rotr may slide right of or may need to be banged on with a hmmer to break it free, with the rotor off next remove the ...
remove the rear. Wheel bearing 2002 Dodge caravan with drum breaks The wheel bearing and hub is a single unit on your Caravan. Four 18mm bolts hold the unit to the rear axle assembly. See the included
...bearing torque - Dodge - Fixya Jul 15, 2018 Head bolt torque specs for 2.4L dohc dodge caravan - Fixya Jun 2, 2012 More results from www.fixya.com Dodge Caravan 2.4 need engine tightening specs and ...
Question about 2006 Caravan
...remove the fourth bolt from the rear wheel bearing of your 2002 Dodge Grand Caravan Sport, you may need to use a specialized socket or wrench. You can find these tools at most auto parts stores. If ...
Question about 2002 Grand Caravan
...remove the rotor and the rotor took the whole thing I'm not sure how but it did so what do I do to get the other half of the hub assembly the bearing part out of the hole. For jobs like this you need ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions