Question about 1997 Continental
...Remove A/C electronic blend door actuator electrical connector. Remove three remaining retaining screws from A/C electronic blend door actuator. Pull the A/C electronic blend door actuator away from ...
...blend door actuator and/or the blend door to the actuator connection is busted. The actuator costs about $70.00 and blend door replacement about $15.00 from NAPA. Dealers and shops charge about ...
remove the electronic actuator. The blend door could be the likely problem as others have stated. I just repaired my brothers by removing the lower center panel under the dash. This exposes the heater
...blend door actuator on 2011 f150 You need to google 2001 f150 blend door actuator replacement. It is slightly right of center above the plastic duct work for the floor area. All lower dashboard ...
Question about 2001 F150 Styleside SuperCrew
...remove an actuator on 2001 ford f150 xlt You need to google 2001 f150 blend door actuator replacement. It is slightly right of center above the plastic duct work for the floor area. All lower ...
...blend door actuator. Remove the 3 LH temperature blend door actuator screws. Disconnect the LH temperature blend door actuator electrical connector. Remove the LH temperature blend door actuator. ...
Question about 2009 MKS
...blend door actuator motor (if necessary) on 1997 Ford F150. 1997 Ford F150. Broken heat/ac blend door. Bought new one (two piece to be installed thru heat box behind glove box. Already cut hole and ...
Question about 2009 MKS
...connector. Remove the 3 RH temperature blend door actuator screws. Remove the RH temperature blend door actuator. 2006 2010 Ford Explorer NO Heat Passenger Temp Actuator Replacement same as ...
...blend door actuator. Do you have to completely remove the dash to get to it? Or does anyone have a diagram of where this is located? Help!!!!! winter is just around the corner Did you burp the ...
Question about 1997 LHS
...Remove the old blend door actuator. Disconnect the wiring harness and the linkage arm from the old blend door actuator. Remove any mounting screws or bolts that secure the actuator to the dashboard. ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions