...base. Remove screws and carefully pry the front and back halves apart. They snap together. Usually working the bottom apart first is easiest. Is it possible to change the cable that goes to the ...
Question about RLT1720 17" LCD Monitor
...Remove the plastic clip at the base hinge to expose 4 screws - remove all four to release the stand. Then remove the 4 black cross head screws that appear to hold the back on, they do but there is ...
remove the inverter to send it off for repair. I've removed the monitor's base (stand) and the screws around the back of the case but the case won't pull apart. I believe there are hidden clips around
...remove the base by squeezing the bottom tabs to the middle and pushing them out. Once the base cover is removed, you will see the 6 screws holding the base arm to the screen. Remove those and the arm ...
...remove the two plastic hinges cover to get the stand off then you will see one more screw once the base is removed, more likely to have bad caps, see example here: ...
...remove the base stand and screws. Then place the unit on a flat surface. Begin at the top side and curl your fingers and press against the edge of the front bezel lip area. With upward force, pull up ...
viewsonic monitor manual Can the stand be removed and the screen mounted on the wall? Yes. The base stand may be removed. The unit is VESA mount compliant with 4 holes. 100mm x 100mm.
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions