Questions & Answers for: release door kenmore elite washer

...pull the small tear shaped release to open door if water still in tub pump may be plugged to clean turn handle on pump to left and pull out trap and clean ..after dipping as much water out as ...

...release for the door. Pull the tab straight down and the door will come open. Sometimes these doors will not unlock for whatever reason. If there are no error codes being generated, this could have ...

...the door will not open even after pushing cancel. The light panel goes off but the door will not release. There is an override switch directly below the latch under the machine on most front

...a torn seal in front ,i have bottom front cover off ,but i dont know how to remove center cover with door off i have a kenmore elite washer the red lite is lit on controlles locked how do i solve ...

...release on the bottom of the door latch. Remove the bottom kick panel by removing three 9/32" screws from along the bottom, then reach inside the washer, up to the door latch. You should feel a small ...

...release to open the door. The following link explains: http://www.fixya.com/support/r622155-kenmore_elite_whirlpool_duet_door_jammed If you have any questions about this repair, or if you need ...

...release for the door. Pull the tab straight down and the door will come open. Sometimes these doors will not unlock for whatever reason. If there are no error codes being generated, this could have ...

...release for the door. Pull the tab straight down and the door will come open. Sometimes these doors will not unlock for whatever reason. If there are no error codes being generated, this could have ...

My washer won't drain and my clothes are stuck in the washer door won't open unplug the unit this should release the door lock solenoid so you can remove wash

Kenmore elite he washer lock light. cannot open door Hi, You can manually Unlock the door Lock System 1. Unplug washer or disconnect power. 2. Remove the lower kick panel. 3. Reach up along the inside