release latch to the hood. Is there any way to pop the hood without that latch? It's a 1999 Mercury Cougar. find the cable that is supposed to attach to the latch, and grab it with a pair of pliers or
...latch for the trunk release? inside the trunk is an emergeny pull cord. when u turn the key there is a little piece on that cord that the key pulls on... u can only fix it with the trunk open though. ...
...cable broken on 2001 cougar, unable to relese hood first, try smacking the hood at one of the front corners while someone else pulls the release handle. or even after you've pulled on it. if ...
...Mercury Cougar The power window motor is running,but the windows do not move. find any screws and take them out first then u want to slide the panel upwards until it releases One screw in the light ...
the chamber from underneath with a crow bar or similar tool to release the hood latch. once opened check the cable and the latch and with a little luck a few squirts of WD40 is all that will be needed
cable release. If this isn't helping, you can remove the grille out of the grille surround... look for attachment screws.. once the grille is out, you should be able to release the hood latch from the
...broken glove box latch. How do I access glove box, gas cover release button is inside. Or is there another way to open gas cover? you will have to pry it open and then replace the latch.good ...
Locked keys in trunk. 93 Mercury Cougar. is there a fuel/trunk release latch inside the car?
...latch on my 2000 mercury cougar will not close. Not certain if it can be fixed or if I need a new one place a screwdriver blade under the latch and while pressing on the release -pull the latch
latch doesn't release from the button, only from the lanyard in the trunk (passenger side). It works fine when it's cold! If your trunk latch doesn't work, check your battery voltage or an obstruction
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions