Questions & Answers for: ref temp

Ad

Question about EL7ATRR Refrigerator

1 Answer

...REF CONTROL. THE TEMP IN THE BOX IS SENSED AT THAT POINT AND SHUTS OFF, THE REF SEEM TO WORK BUT THE FREEZER WILL WARM UP. IF YOU WANT TO USE A REF IN THE GARAGE, FIND ONE THAT HAS THE THERMOSTAT ...

Ad

...I have seen this work in garage ref but be careful because it may be a fire hazard? To answer your question no the unit will not operate properly if its located in a temp below normal ref

Ad

Question about 650 / O Bottom Freezer Refrigerator

1 Answer

...ref. temp is between 36 and 40F degrees. Take the temp with a thermometer and record it several times a day for a few days then do an avarage and this will give you the avarage temp. If you have not ...

Question about 25.6 cu. ft. Side-by-Side Refrigerator with In-Door-Ice Dispensing System

1 Answer

...ONLY WHEN IS EMPTY KEEP TEMP. 39TO 43 BUT WHEN WE PUT FOOD SUPLY EN THE REF. TEMP GOING UP TO 59 TO 70 DEG. INT. FAN AND. COMP.RUNN, PROPERLY./ check the air circulating to the ref from the

Question about Sta-Rite Max-E-Therm High Effiency - Propane Heater - 400,000 BTU

1 Answer

...temp is about 75 Ref: Sta-Rite Max-E 400. Pool temp is about 75 deg, but the water temp reading on the control panel climbs to the high limit (104 deg), then heater shuts down Your temp sensor has ...

Question about LFC22740 Bottom Freezer French Door Refrigerator

1 Answer

...ref. to get to correct temp.Plus the ice maker wont start to work until the freezer temp gets to 15 degrees.if the ref. has been in use then check the power button on the ice maker itself and make ...

Question about LFC22740 Bottom Freezer French Door Refrigerator

1 Answer

...labeled freezer temp controls a vent between the freezer and ref space, allowing air into the ref side. the other control determines run time. try turning thefrz setting up to raise the ref

Question about Elite 22.4 cu. ft. Bottom Freezer Refrigerator with Adjusta Cube Ice Maker

1 Answer

...warmer Sounds like bad settings. Sometimes, the temp setting(sensed in ref area) controls runtime, and the frz setting adjusts a vent whuch passes air from frz to ref area. try raising frz

...start but when it is normal working temp it cut out and struggle to start and don't pick up refs bike start but when it is normal working temp it cut out and struggle to start and ...

running in the frezeer then it will freeze up causing the temp to rise in the ref side. If the compressor fan is not running then the unit will get too hot and be a ref problem, process of elimination

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

Marvin
Marvin

Level 3 Expert

85111 Answers

Brad Brown

Level 3 Expert

18067 Answers

Gil Shultz

Level 3 Expert

3388 Answers

Are you a Refrigerators Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...