Questions & Answers for: redon tv

...4 hours to do correctily, also , after it is done, the whole alignment and geomitry have to be redone, pain in the but to ...

...the pots in the front show a band of each color when tweeked (I know the convergance will need redone.) Any ideas on where to concentrate my components search? click the link ...

3 pictures on screen red blue green i think it needs the convergence redone but it is not where it should be in the menu picture on my mitsbeishi projection tv turns green and red a looks like you are

...on the left side of my TV that comes and goes on my 40'' Samsung LCD TV. Any ideas how to fix?? redone all connector inside of the tv like those flat wire you have to check allthose flat and

...again. Dear Sir , do you have any electronics skills? If yes check for bad connection which must be redone by soldering. carefully open the bad of your TV( the tv must be unplugged), remove the main ...

...is because you do not have the correct input connected or the set needs to have a channel program ...

...if damaged they can't be fixed and a new board is expensive) , the bad soldering found and redone. While you are there you must also check the other components, some of them might have been ...

...Settings Problem with TV. It appeared not to save the channel settings and the tuning had to be redone several times. It now seems that the digita signal for the ABC channels is the only problem. ...

...off the key the tv loses all power and all the settings get lost. You'll have to have the wiring redone , correctly this time. This is a job for a specialist so go looking for a radio/alarm shop ...

I have a 60 inch aquos sharp tv and it was hit by lighting 1 year ago. And ive redone everything inside it. Bought a new main board new video board and t con board. Even new power cord all from sharp.