Questions & Answers for: red white yellow green electrical

...RED,BLK, WHITE, GREEN. ON THE DRYER IT HAS YELLOW, LT BLUE, BLK, RED. WHAT GOES WHERE ? DEE first: the cord: The green is chassis ground. The white is neutral (a ground from the power company) .. red ...

...red/grn(H|+ |wiper motor | | LF WINDOW UP/DN|white - yellow |A |DDM *1 | | RF WINDOW UP/DN|wht/pur - yel/pur |A |FEM *5 | | LR WINDOW UP/DN|blu/red - pur/blu |A |REM *5 | | RR WINDOW UP/DN|blu/orn - ...

...red,white,black,yellow,green, and orange wires.The red,white,and black are thicker gauge than the others. red, white, and black will be your high voltage. Green will probably be for ground and yellow ...

... you should reverse either red and yellow position only or yellow and white position only but if in doubt check with your local electrcian to confirm always check electrcity regs before altering ...

red to w1, white to u1. u2 an v2 are brigged. now the following wires were connected to the old switch there colours are and connected to, blue to u1, white to w2, black no.1 to w1 nd blackno.2 to v1.

...Red Left-hand high beam 19 7.5 Brown Heated door mirrors 20 10 Black Windshield wipers 21 30 Light green Electric windows 22 7.5 Brown ABS 23 15 Light bue Reverse lights 24 15 Light bue Brake lights ...

...red, yellow, green/white, and blue. I need to see an electrical diagram of the coil arrangement on Subaru Legacy 2001 petrol AWD non turbocharged. Specifically I'm trying to identify the wire on the ...

...red yellow & brown & plug has white black & green The "plug" white and black should wire to either of the pressure switch terminals identified L1 and L2. L1 and L2 are isolated "line" in and contact ...

...white line at the top of the cupholders that I would expect to light up with the ambient lighting, but does not light up in my truck. Does it light up in others? Is there a way to get lighting in ...

...white common wire, just red/blue/yellow/black for speeds and brown and orange for capacitor. The old blower had an orange wire as the common, so my question is do I not need a common wire and if so ...