Questions & Answers for: red light cycle selection whirlpool

...CYCLE SIGNAL for 3 seconds until the CONTROL LOCKED status light turns off. unplug washer for 5 to 10 min then plug back in. this should clear the control. if not, the main control needs to be ...

...red light next to the selected cycle blinks, all of the other red lights by the water temp, cycle speed, etc. are red,not blinking, there is no click sound when the water start to flow,the machine ...

...cycle, then makes a strange noise and starts blinking red lights. No error code... and no way to unlock. Soaking wet clothes are sitting in washer. take the kick plate off and put your and inside u ...

red lights) use standard lock asm same as GE and samsung. New duets (green lights) use whirlpool/new maytag unique asm. New locks come in two interchageable models, German (made in china) and Mexican,

...cycle selection knob is flashing. How do I fix this? Hi! Please try the following: 1. Unplug the machine from the main power supply (carefully, no wet hands!) 2. Wait for about a couple of minutes 3. ...

...lock button the green cycle complete light comes on. When the cycle is complete the red control lock light comes on....Wires crossed? Your brain wires are simply crossed my dear!  Moo ha ...

...cycle) and beeping...door remains locked. F3E2 error, Wash light flashes 3 times then 2. Took off front lower cover, Found Manual!!! Unscrewed filter and was so full of trash, clean and reassymbled ...

...red light on model W10578789 How do I open door. Door locked with flashing red light. does not respond to any buttons pushed. This might work try unplugging it for about 45 -60 seconds and see if it ...

...light flashing, cannot open door, cancel cycle, turn off machine. Unpluggeed and replugged. No luck. Whirlpool Duet Front-Load Washer (WFW70HEBW) - YouTube ? 2:09 www.youtube.com/watch?v=bO80EPGg79A ...

...cycle including normal the sensing light flashes continuously but never starts. I have fully cleaned the ducts, lint filter and vents and the check vent light is NOT on. The door is also fully shut ...