Questions & Answers for: reconnect remote dish box

remote until the power goes off and then back on again, so the blue light should turn red then back to blue again. immediately release the button or you will turn the tv off again. wait and see if the

reconnect manually and this will solve the problem. If you are not comfortable manually setting up the wifi connection you can reset the TV to factory settings and go through the setup process but you

dish program guide I disconnected everything and unplugged TV and satellite box. When I reconnected the only thing that doesn't work is the program guide. It says it is searching but nothing comes up ...

remote, then select option 4. Next press 0, 1, select - you should now see the engineer's menu. Choose option 8, 'Full System Reset'. The box will now take a few minutes to reset itself Try pausing or

remote & the receiver, then I would recommend checking the source from which the receiver is plugged in, is it plugged directly into a electrical outlet on your wall, or is it plugged into a power

remote. If you are using a SCART connection, all you need to do is turn the Sky box off and back on - but you've done this already. 2. Check the connection from your Sky box to your TV - disconnect it

...are working. The rest of the remote is working fine and I have tried changing the batteries. I also disconnected the remote and reconnected it to my box but its still not working? Power cycle the ...

remote that came with the TV to work your other stuff. They come with universal remotes. If your TV plays dvd's perfect through your AV Input of the TV, you might have a problem with your antenna feed