Questions & Answers for: rear clunk

...clunk,is it in the rear end then maybe it is the rear end.you kinda need to be more specific if this information doesn't help i have a 2000 jimmy and my right rear shock at the top of the connector ...

clunk in rear end after braking my 94 jeep cherokee clunks in the rear end after coming to a stop. when i hit the gas it will make a clunk noise like something is letting loose. when i was ...

Clunk in rear of car. I have a "clunk in the rear of the car. No mechanic seems to find what it is. We can rock it from the side and it "clunks" but we cannot discover why. What needs repair? check ...

...rear end. Changed fluid and replaced gasket problem started after Check your tranny mount sometimes the rubber part cracks and makes a clunking sound, also check your universal joints on the ...

...service and adjust rear brakes. If not, go to the drive shaft, check the u-joints and/or jack up the rear of the truck and rotate your tires by hand to see if there is a clunk in the rear end

double clunking noise in rear of 2005 f150 from a stop when i take off it double clunks in the rear. I just had the rear end rebuilt and everything is fine with the rear end. It just clunks when I ...

rear end of the car and it has a really short clunk to it like what ever is bad is small in diameter. ( the sounds repeat really quickly like clunk clunk clunk, not clunk...clunk...) not sure just how

clunking sound low accleration does not accelerate and makes a clunking sound in rear and engine small child caught in rear wheel well preventing the axle from turning, in in turn putting a strain on ...

...rear wheel drive ,does it clunk when you put it gear or only clunks when you turn under power,if it doesn't clunk when put it in gear I would say it is in your rear end differential then,or rear axle ...

...clunk in the rear end on jeep tj 1997? I have a dif locker I think it's bad and what is causing my clunk. Jacked the rear driver side and spun tire and driveshaft moved then stopped and I heard click ...