brake light bulb; the glass bulb had separated from the brass base and shorted out when I put the vehicle in reverse. Vehicle worked fine otherwise. Replaced the bulb, end of problem. Same idea as the
...rear with a electrical connector attached. Tap on it lightly while someone activates the 4wd button. Have truck running in neutral with foot on brake. (dont get run over). If it goes into 4wd, then ...
...rear taillights, brake lights and signals on the truck. This harness ultimately connects to a trailer wiring harness. the snap connectors have all corroded and do not properly ground. You don't need ...
...rear brake lights work with the head lights on, but do not work when you depress the pedal. So the lamp is good, but the intermediate wiring is not. The cab light works with the brakes, but not the ...
rear brake assembly.There's a special spring tool you can get at auto parts store to remove and install springs,me got one. Go through few Brake system and Brake related solved problems.select the
Question about 2001 Tundra
brake. I have a Toyota Rav4 1998 and when i step on the brakes it pusses back the petal like the abs is kicking in, I have already changed the borders and thrums on the rear and the disks on the front
Question about 1989 Town Car
...rear brake gradually froze up. Will go reverse but completely frozen forward. Messing with the footbrake has not produced results. brake light is on. Is this a drum/brake problem or a parking bra ...
Question about 1989 Town Car
rear driving light and brake light have suddenly quit working. Any ideas? I have checked bulbs and visually checked fuses. I swapped the left bulb to the right and it still didn't work. Harness wiring
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions