Questions & Answers for: rear axle removed 3 ton

i can not get the rear brake drum off to replace the pads. do i have to take the axel apart to get it off? 3/4 ton full floating axle rear ends do need the axles removed to remove drums yes

Ad

Question about 1986 Pickup 4WD

1 Answer

rear axle bearings how do I get the backing plate off , when I'm trying to replace the rear bearing ????? this is a 1986 toyota 4x4 pickup rear axle bearings.. manual trans. There are 4 bolts for each

Ad

Question about 1986 Pickup 4WD

1 Answer

rear brakes on a 65 chevy 3/4 ton pickup Hi! sensenicht Are there bolts on the outer hubs. If so removing the axel hub bolts will allow you to pull the axles. You should be able to remove the lock nut

...Rear Axle Seal on a 2002 Dodge 2500 4X4 raise and support the pickup. remove tire. remove brake caliber. remove rotor. unbolt axle and remove. remove lock clip. remove axle lock nut 2 and 9/16. pull ...

Question about 2001 Silverado 2500HD

1 Answer

...rear rotor chiv 1 ton 2001 1-Remove the bolts from the center of the hub, 2-now pull the axle 3-remove brake calipar and mounting bracket 4-remove hub nut(this requirs a special socket) 5-now you can ...

...rear end. 1 Disconnect hydraulic brake line. 2. Disconect e-brake cables beside the frame. 3. Disconnect driveshaft. 4. Remove shocks 5. Disconnect ABS wiring (if equipped) 6. Remove bots at each end ...

...rear end from our 1993 chevy z71 Fairly simple process( but not always easy,Just warning you in advance) 1. Disconnect rubber brake line from top of axle.Plug appropriately to prevent fluid loss. 2. ...

...rear wheel bearing on 2005 gmc sierra with drum brakes? not very much info. 1/2 ton? 2wd? If it is a standard pickup there are "C" clips that hold the axles in. You will have to remove the 3rd member ...

...rear right axle Remove diff cover turn 3rd member until you see spider gear pin set screw, remove set screw pull pin push axle inward until c ring is visible remove c ring pull axle QU40221 19 Spline ...

...rear brake drums on a 2006 Chevy Silverado Most 1/2 ton pick ups don't need any special tools to remove the drums. Simply use a brake spoon to back off the star wheel inside the brakes, and the drum ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...