Questions & Answers for: rca hd52w67 convergence

...rca chiper checker to realign and adjust the settings call your local tech. shop and ask for help or a service call to repair youe sensors konw that its to far off to adjust and it lets you know ...

...rca hd52w67 and the convergence is off it is also gone from the menu Okay, usually the parts that go bad to make the convergence option drop from the menu are the following. Fusible Link (FL1231) ...

hd52w67 i have a damn rainbow!!! on my tv. i have a convergence issue and would like the part # for it. Open FUSE FL231. next to FBT onright side 3 of them in a roll.

RCA HD52W67 convergence menu missing from menu and has a b,r,g line going through the top of the menu and it looks like every thing is in 3d were can I find the two ic chips that everyone is talking ...

RCA hd52w67 Convergence won't complete OK I had a focus problem with the POS TV about a year ago. When the TV got back from the shop the auto convergence would start but would not finish. I called the

hd52w67 replaced fuce in bottom left to fix convertion problem worked for 5 min then blew somthing is drawing to much current can you trell me where to purh. convergance board Unless you replaced the ...

...HD52w67 rca. Have a 3d effect. know we have to adjust the lamps. we go to menu but we have no auto convergence. What can we do now? Is there a manual convergence setting in the menu? if so try to ...

...rca hdtv. the screen looks like its in 3d. can this be fixed? model# hd52w67 It seem like a convergence trouble. I tink it is a ITC222 chassis in this set. If it is, you probleme is eeprom for ...

RCA hd52w67 analog convergence problem. I have an RCA hd52w67 rear projection hdtv. The ATSC signal looks perfect, but any analog connection (composite, s-video, component, and ntsc) has awful ...

...HD52W67 is showing three pictures on the screen. I have tried zooming, but it only makes all three pictures larger. I cannot get it to only show one screen. What can I do? Your TV most likely has a ...