Questions & Answers for: raymarine st6002

...and can follow instructions. It's easy the hardest part is connecting the pump and bleeding the system. i have a st6002 raymarine autopilot i need to know how to install this is there a ...

...raymarine st6002 hello i would like to connect my gps garmin 2106 to raymarine st 6002 by nmea port plz help me best regards loic The power cable of your 2106 acts as a data cable also. You should ...

raymarine smart pilot st6002 backlight is too dim Backlight as received is too dim Get a new backlight, inverter is probably ok. The way to check that the inverter is ok: disconnect the backlight and ...

i have a mercruiser120 engine for my boat but i dont know where all the wires and cables go, can you help me? but a manual on ebay

...raymarine st6002 autopilot controller. The st6002 controller is plugged into a smartpilot x5 via seatalk cable. At the same time I would like to connect my st40 wind via seatalk to the controller. ...

I have a Raymarine S1G Autopilot also a Garmin 187 GPS depth finder and fish finder als a raymarine wind and speed instrument also a laptop with MAXSEA 10.1, I would like to connect all these devices ...

two circuits thanks for reply we are working on raymarine co. but they say we must go through Porrtsmouth(we are in NZ) The compass hdg is awol, the rest seems okey dokey The prce mentioned was retail

where can I buy online the raymarine st6002 hydrulic outboard back autopilot suncoastmarineelectronics.com

...on and does not change when pressing various control buttons Thanks, wilhelm [email protected] Raymarine told me the unit was faulty. I stripped and found corrosion on one side of the circuit ...

...Raymarine compass sensor in a GRP sailing boat underneath the chart table at least 50 cm away from metal and magnets. It is connected to a SP X-5 computer unit and a ST6002 autopilot controller. ...