...water level a bit lower I recently replaced both my toilets' fill valves and flappers to resolve some running water/leaking issues - which was fixed on both toilets. The toilets are Kohler 1.6 gpf ...
...Water Level Slowly Drops I recently replaced my toilet's fill valve and flapper to resolve some running water/leaking issues - which were fixed. But now my problem is that as soon as the bowl is ...
...water level, usually found on top of the fill valve. Or there is a lever system that raises or lowers the float, thereby raising and lowering the water level. The first it typically found on fill ...
Question about Cimarron Comfort Height elongated 1.6 gpf toilet with Class Six tech
...water level. Once the water level rises, it rises the float, and the float tells the fill valve to stop filling the tank. While the toilet is running (hissing), try raising the float all the way up ...
Question about Cimarron Comfort Height elongated 1.6 gpf toilet with Class Six tech
...raise the water level in the tank . If water runs continuously through the toilet, lower the water level in the tank , adjust or replace a lift chain or wire , repair or replace a worn flush valve , ...
Question about Cimarron Comfort Height elongated 1.6 gpf toilet with Class Six tech
...raise or lower the C-L. Occasionally the fill valve simply won't shut off, which means that it's defective. If so, turn the water supply off at the shutoff under the tank. Buy a replacement valve ...
Usually answered in minutes!
350 Questions
260 Questions
250 Questions
168 Questions
217 Questions