Questions & Answers for: putting pickup coil dodge ram

Question about 1983 Ram 50 4WD

1 Answer

...pickup in and the mechanics just scratch their heads and have no idea what is wrong. Any help is greatly appreciated. Thanks my favourite mantra this time of year. check the ignition relay... it is ...

Ad

Question about 1999 Ram

2 Answers

...pickup 5.2 L put the plugs on wrong so i had to look up the firing order and redo the wires now i got that fixed when i go to start my truck it runs for a minute or two and them dies i press the gas ...

Ad

coil, changed distributor cap, got new battery, put gas in carburetor but still wont fire up!?! Please help!! We had this same problem with the 1992 Dodge Ram D250 pickup truck we own. We wasted a lot

Question about 1983 Pickup

1 Answer

...Dodge Ram Truck Starts up and then shuts down about 3 seconds later. It's like the Ignition is turn off, but it isn't! I've checked the fuel lines and pump, they are in running order. Put ...

Question about 1998 Ram 1500 4WD

1 Answer

...of the coil (pickup, crank sensor, ignition module or primary wiring circuit). If there is NO voltage at the coil, the problem is on the supply side (the ignition switch or ignition wiring

Question about 1998 Ram 1500 4WD

1 Answer

...pickup coil it cleared out and ran great for about ten miles and now its running worse then before.. wat should i do to fix the problem You'll have to figure out if it is a fuel or ignition ...

...pickup and coil for problems or brake down if they check out ok you need to remove the valve covers and role the engine over with the coil unhooked and watch the rocker arms carefully for travel as ...

...COIL... 1985 DODGE RAM VAN 360 check the positive wire from coil, see if there is spark, or try to get some wire put it into positive battery and the one end into positive of coil, then try to start ...

Question about 2002 Ram Pickup 1500

1 Answer

Engine wont start Put in a new engine. Torqurd everything to spec. It turns over but it wont start there are so many things that you may not have done that is the problem are all the harness ...

Truck is Missing loading up on fuel I replaced the ECM/PCM the ignition coils and put new plugs in the truck ran great until it warmed up then went back to missing and loading up 4.7 L engine missing ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...