Question about DC14 All floors Bagless Upright Cyclonic Vacuum
...wand is turned on... doubled checked for cracks in hose -- none took house off unit to check for blockage --- none.. suction works fine when using as normal on floors. You need to replace the belt ...
Question about DC14 Animal Bagless Upright Cyclonic Vacuum
...wand only. how do you get the vacuum to revert to the floor usage You have to put your foot on the front of the machine and pull the handle back. If it is a case of poor suction that you are ...
Question about DC07 All Floors Bagless Upright Cyclonic Vacuum
...wand, and remove the hose from the handle assembly completely and set it aside. Also remove the dust bin assembly completely from the machine as well. Step 2. Once you've remove the handle from the ...
...wand, and remove the hose from the handle assembly completely and set it aside. Also remove the dust bin assembly completely from the machine as well. Step 2. Once you've remove the handle from the ...
...wand, and remove the hose from the handle assembly completely and set it aside. Also remove the dust bin assembly completely from the machine as well. Step 2. Once you've remove the handle from the ...
...back in, only the brush portion works, the suction does not. What could be the problem and is this a pricey repair? Thanks, Renata Check to make sure the wands and tubes are all put back on
...put the hose back when I'm finished? Hi there, Sorry to hear you're having difficulties replacing the hose on your DC14. You can see the correct way to reattach the hose and wand onto your ...
Question about DC14 All floors Bagless Upright Cyclonic Vacuum
wand, handle and hose are all unattached. How do I put them back together? I'm pretty sure our cleaning lady wasn't sure how to release the wand...and ended up removing the wand (just the metal "tube"
Question about DC14 Animal Bagless Upright Cyclonic Vacuum
...put it in the vertical position to use the hose, there is no suction at all. I've cleared any place that there could be an obstruction. Also, in th e upright position it has suctions for about 3 ...
Question about DC14 Animal Bagless Upright Cyclonic Vacuum
...PUT IT BACK IN PLACE. Hi there, it's Jack at Dyson. I'm sorry to hear you're having difficulty with your DC14 - it sounds like this spring may have come out of the clip which secures the Telescope ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions