Questions & Answers for: put oven racks profile

Ad

Question about Profile Spectra JGBP90 Gas Kitchen Range

1 Answer

...are gray and I have not found a thing that can clean them without scratching the enamel. This causes everything to stick to the racks and turn brown. Try putting them in the oven when it self

Ad

Question about Profile Spectra JGBP90 Gas Kitchen Range

1 Answer

...be dulled. Otherwise, no problem. Anything you put in the oven will be subjected to temperatures over 600 degrees. Metal only. It is kinda smoky but you can also put your outdoor grill parts in

Ad

Question about Profile Spectra JBP95 Electric Kitchen Range

1 Answer

...Put separate temp gauge inside oven, digital read-out does not match temp on gauge, gauge always lower that read-out. Thanks! Sir, I think the top oelement is for broiling ONLY. It should not turn on ...

Question about Profile Spectra JGBP90 Gas Kitchen Range

1 Answer

...put the top burns inside and clean them at the same time? the reason they tell you not to do that is so the racks do not warp. I wouldn't do it. I did once accidently leave the racks in and they were ...

Question about Profile Spectra JGBP90 Gas Kitchen Range

1 Answer

...the smoke to leave the house and put it on a cleaning cycle. Use aluminium foil to line the base of the oven rack. That will stop this from happening again when your containers are

Question about Profile Spectra JGBP90 Gas Kitchen Range

1 Answer

...oven panel out by pulling up from the rear. Remove the screws holding the flame spreader and remove the flame spreader. Now you will see the burner and igniter attached to it. There are 2 screws ...

Question about Profile Spectra JGBP90 Gas Kitchen Range

1 Answer

put oven on 350 and the flame should lite in around 30 to 40 seconds,any longer you have a bad ignitor,open the draw under the oven door and look around the opening and you'll see a tag with the model

Question about Profile Spectra JGBP90 Gas Kitchen Range

1 Answer

...oven can I put the stove cooking racks inside to clean also?, Is this my wife asking this ? lol, i had the same arguement with her, dont leave the racks in, it will tarnish them possibly bend ...

Question about Profile Spectra JGBP90 Gas Kitchen Range

1 Answer

...oven,remove the flame panel and you'll see the ignitor attached to the burner tube,unplug the wire harness going to the ignitor,remove the screws holding the ignitor in place,plug in the new ignitor ...

Question about Profile Spectra JGB920 Gas Kitchen Range

1 Answer

put the oven on 350,if the flame doesn't lite within 40 seconds you have a bad ignitor.i looked up your model number,it shows a round ignitor but when i look up the part number it shows a flat ignitor

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Craig Butler
Craig Butler

Level 3 Expert

1730 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Paul Carew

Level 3 Expert

3428 Answers

Are you a Kitchen Ranges Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...