Questions & Answers for: put oil printer

HP Deskjet 1000C The printer will print about 1/3 of the page then thinks it is finished put some sewing machine oil on the silver slide bar.dont get any oil on other parts

...metal bar that the cartridge holder travels on may need lubing get 3 in 1 oil and put one or two drops of oil on the bar and then manually move the holder back and forth a few times to spread the ...

...is a special oil that HP puts out for techs but if you have some light machine or sewing machine oil you can put two drops of it in the carriage rod and print out a test page or two to work it

...is not known. I have used the oil everywhere else. I don't put much into the printer when they start having issues, as it is cheaper (usually) to replace them. Interesting society that we live in

...path". What is the problem? you need to lubricate the slide bar with some thin oil ( sewing machine oil).put the oil on your finger and then touch the bar this way you wont spil oil into the ...

...is no oil on the silver bar that the carriage slides left to right on.put some sewing machine oil on the tip of your finger and then apply it to the bar, be sure you dont put oil on any other ...

it off, put a few drops of oil (3 in 1 or sewing machine oil) onto the bar that the carrier rides on, if you can move the carrier to the left and put some oil (just a few drops) on the right side also

Canon CLC 700 Copier. Ask for oil. I put oil on, but stil it ask for more oil. Replenish oil from oil tank & Change the Oil pump.

...Oil Type-SS where do i put it and how muck do i put in COPIER (B051/B052) 26 July 2002 12. Remove the oil tank cover [A] (1 clip), and fill the oil tank to the maximum line. NOTE: Do not fill the oil ...

...clean it off by putting a drop of oil on the rod and move the carriage back and forth as you wipe it off. After it is all nice and clean and moves easily by hand, put one more drop of oil on the