Questions & Answers for: put new print head canon

...put brand new cartridges in could it be the printer head? Call Kodak @1800 421 6699 and get a new printhead free of cost.....Printhead has gone bad and it is the part in which we install the ink ...

Ad

Question about MG6150 Printer

2 Answers

print onto Transparency film from my Canon MG 6150 as there is no setting for transparencies, what paper setting would i use Try the setting for glossy photo media. You want a minimum of ink. Also use

Ad

Printer is only two months old. pls check the ink level and be sure it is all full and try to clean the clogged head deep cleaning then test print you can choose on the printing preferences 

Question about MG6150 Printer

1 Answer

...be sure that you are using a new cartridge before executing the deep clean4. then print the alignment page 5. after printing the alignment page 6. scan the page on the

Question about ESP Office 6150 All-in-One Printer

2 Answers

...new printhead message. Inkjet printers need to be used frequently to prevent ink drying out and blocking the print head nozzles. If the print head cleaning maintenance routine does not clear the ...

Question about ESP Office 6150 All-in-One Printer

1 Answer

...what else can it be? Goes through the motions of printing but no ink on the paper Call up kodak. If you already put in a new printhead, there really is nothing to do but replace the

Question about MG6150 Printer

1 Answer

...canon mg 6150 how to give him a hard reset? This is not directly related, but the link to the service tool should solve your problems. ...

print-heads built into the disposable cartridges, the first thing to try is new or different cartridges to see if the error message goes away or changes. If not, the problem may be a failed electronic

...new print head will fix things. But that is just a chance as what damaged the print head may have damaged the logic board. It is simply a gamble. These failures can occur without warning and without ...

head alignment a little better but not perfect yet . The slight offset of print is enough for the Post Office to fail to read the QR/Bar Codes it prints out. Do I need to keep doing a manual alignment

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...