Questions & Answers for: put ip1600 ink cartridge

IP1600 1.Press Resume button hold for 1 - 2 minutes (count to 1 to 15-16) 2.Open the cover right away 3.Release Both cartridges out and then put cartridges them back again 4.Close The Cover 5.Turn Off

...ip1600 ink colour? the hole is too small. IF YOU HAVE BUY THE INKS THEN YOU GET NIDLE AND SIRING THEN YOU WILL USE THE TECHNIC DOCTOR USE TO SWAP THE LIQUID FROM THE CONTAINER AND INJECT IT IN THE ...

...ip1600 printer says ink cartridges are empty even though I put new ones in. Dear hoppygink, Canon pixma ip1200 series (ip1200,1600,2200) identify the first new cartridge installed in the printer and ...

IP1600 1.Press Resume button hold for 1 - 2 minutes (count to 1 to 15-16) 2.Open the cover right away 3.Release Both cartridges out and then put cartridges them back again 4.Close The Cover 5.Turn Off

ip1600 ink cartridges are not recognized? This happens all the time, when this message comes up I take out the ink cartridges and put them back in, but this time I did that but it doesn't seem to help

...ip1600 when I plug it in it has a green light and then switches to the yellow light 7 times. oh and when I plug it in to the computer it says theres a problem with it recognizing the cartridges so I ...

IP1600 1.Press Resume button hold for 1 - 2 minutes (count to 1 to 15-16) 2.Open the cover right away 3.Release Both cartridges out and then put cartridges them back again 4.Close The Cover 5.Turn Off

IP1600 1.Press Resume button hold for 1 - 2 minutes (count to 1 to 15-16) 2.Open the cover right away 3.Release Both cartridges out and then put cartridges them back again 4.Close The Cover 5.Turn Off

IP1600 1.Press Resume button hold for 1 - 2 minutes (count to 1 to 15-16) 2.Open the cover right away 3.Release Both cartridges out and then put cartridges them back again 4.Close The Cover 5.Turn Off

...iP1600 "an ink Canon Pixa iP1600 "an ink cartridge is not installed properly". It looks fine? Try taking it out and putting it back in again. Reseat the cartridge. Also unplug the power to ...