Questions & Answers for: put ink canon mp510

...I put in a new Cannon black ink tank, it printed the first copy and jam. After switching off and on paper rolls off by itself and paper jam message keeps popping up . make sure you put it in ...

...put the machine off and on a couple of times but it still does not work. Hi, does your printer have enough ink? If enough still blink. need to down load a reseter from canon web site inquire if they ...

...ink cartridge needs replaced. I'm trying to turn it on to replace cartridge and it will not power on. I've tried other outlets and still cannot get it to turn on. I had a similar problem. What worked ...

Printer won't print correctly I put in new ink cartridges and tried to print but copy is illegible. ensure the ink cartiges r original and check head cleaning process

...put in new Cyan ink into my MP510 printer. All clours work fine except Cyan which prints but with smudged lines through it. I've run a deep clean 6 times and normal clean about 8. cleaned the printer ...

yellow ink cartridge can't be recognised. replaced yellow cartridge now the printer won't recognise it. Hi, put new cartridge that is all

...ink cartridges. there are good pictures in the PDF of the Easy Setup Instructions available on the Canon Printer website. Look under the printer, then support, then downloads: ...

...ink all outher colors ok cleand and put a new print head in still no black If you did put in a new printhead, it means you need a new purge, or cleaning assembly. If it doesn't clean and prime the ...

put some need to be unscrewed so you got to know how they come out so be careful and not push to hard on them, if the heads are on the ink then it is a easy job to clean them, It worth a try it worked

...put some sticky tape or the original orange seals that come with the cartridges over the outlet holes, then turn them back. Remove the printhead by lifting up the grey lever and taking out the black ...