Questions & Answers for: put barrs leak coolant goes

...leak symptom ... it's 20K miles later and I have not had to add coolant since the Barrs. I generally hate these fix it in a can type products, since many of them are snake oil, but Barrs can work ...

leak. My new radiator works fine and is filled, but I didn't put any antifreeze in the reserves. Thanks first off there should be one or two bolts on side or bottom if there is one remove then it will

...put in a seal tab after service or void the warranty. Your head gasket or intake gasket may be leaking a little. If you are not getting any coolant during regular driving it may not be that bad, and ...

...the radiator as well as the resevoir? fill the radiator and fill the coolant bottle.if the leak is not that big try adding some lucas radiator stop leak or barrs leak radiator stop laek to the ...

"Barrs stop leak" isn't too bad, if the leak is in the tank or fins you could always have it soldered. Could use a little more info on where exactly the leak is. Frost plug, heads, radiator, or hoses

barrs stop leak put in--car does not seem to be getting coolant from the resevoir Barr's Leak can be used to seal leaks, but if they put too much it can make a car overheat, unfortunately for you. Try

where is the radiator? Their is no radiator cap that goes directly into radiator. if you do plan on putting barr's leak in it just put it in the coolent tank on the passenger side that is the only way

...Barrs leak. It stopped for awhile. Now I have little warmth, but heater gauge goes to 3/4 mark not half way mark. I drove for an hour doing some running around and I noticed my gauge finally went to ...

...coolant level reduce but car temperature remain normal and no leak observed from any where. Suggests sign of internal leak. Check dipstick for engine oil to see if there is a sign of coolant mixed ...

...put some Barrs in and now have zero leakage, no overheating either. I would have re-replaced the manifold's gasket but the car is just a beater. Now this stuff is a bandaid not a repair. So if you ...