Questions & Answers for: pulley puller

...pulley make sure the puller purchased is compatable with your vehicle. You will have to rent a special puller to remove it and replace it. Caution do not put it on backwards or you'll bye another

...hope this helps! REMOVE THE PULLEY LOCK SCREW.THEN USE THE POWER STEERING PUMP PULLEY PULLER THE FLANGE TYPE PULLER NOT THE 2 JAW PULLEY. THE PULLEY SHOULD COME OFF.YOU ALSO NEED A PULLEY

...pulley puller set. You'll remove the crank bolt and then use the pulley puller to pull the crank pulley off of the crank shaft. The install the new pulley making sure to torque the crank pulley bolt ...

puller to the pulley and tighten the puller slowly to extract the pulley. Please let me know if you have questions, and thanks for using FixYa. Lock the flywheel: Attach the puller and tighten bolt to

...pulley puller / installer because the pulley is pressed onto the shaft. the puller kit can be rented at local part houses like advance, autozone,etc. Hi there! Sometimes those pulleys need a tool to ...

...pulley puller and impact. Still no luck. What should I do? Did you take out the center bolt? You have to remove the center bolt, then use a harmonic balancer puller. Not the two or three armed pulley ...

...pulley for a puller how do i get this pulley off??? Use a puller that screws into the crank & has jaws that fit the pulley spokes Have to buy the correct tools (puller & installer) Check out ...

...or a pulley/gear puller: http://www.harborfreight.com/automotive-pulley-puller-66868.html It's on the shaft pretty tight, even after the nut is

...pulley puller kit. Autozone has them for "rent", meaning you pay a deposit and get it back when you return it. You cannot use a conventional puller, as the pulley will bend or break from them. You ...

...pulley puller is the best way to pull the pulley off which engine? the fsm covers that, its free to read. old post. ZJ jeep 93 4.0L fsm verbatim, buy a puller, or make one, or use a huge gear puller, ...