pull the front cover off and see if there is a loose wire in the control box (behind where the control knobs are). it could just be a bad thermostat. you will see a copper wire with a silverish end on
...knobs and you will need to pull them off. Then the cover plate that hides the galvanized cover behind it. You may be near the capacitor and I always discharge any stored energy with a screwdriver ...
...knobs are on usually front left or mounted on the case that holds the front coil if its a slide out model pull it out it will be located near the compressor its either silver or grey metal can style ...
...knobs such as fan speed, cool, and so on. It will be on the left side on this unit. You will need to remove a few screws to get into the wiring area, but once you are in just be careful not to pull ...
front 80 degrees. Its possible that your vent controller is not working. Is the air coming out the defrost vents? If yes, this is the default when there is no vacuum to the switch. In this case, check
Usually answered in minutes!
2,517 Questions
1,056 Questions
713 Questions
416 Questions
354 Questions