Questions & Answers for: pull front axle shaft diff

front right cant pull out the axle from diff help help vitara 2000 thanks mate charles Hi.. The step to remove the front Axles of you Vitara. Raise and support Vehicle . Remove front wheel, Drain Diff

...front differential is leaking out the driver side where the cv joint bolts onto it. How do I go about fixing that? I cannot see it, but I am guessing that you need to replace your axle seal. To do ...

front axle. If you cannot get it to engage that way, then you will likely have to pull off the passenger side extension housing to access the engagement collar and fork. If you cannot get it to engage

...will grind but front diff isnt working you have a vacumn actuator on the passenger side front axle tube that engages your front axle when put in four wheel drive. those are notorious for not ...

...of the axle in the diff housing that has to be removed before the axle can be pulled out the rear diff cover has to be removed and the carrier turned until the clip is revealed and can be pulled ...

...axle shaft come out? You have to remove the brake backing plate and then pull the shaft with a slide hammer.Or if the car was right on the changover the backing plate of the diff needs to come ...

pull the right front brake caliper assembly loose and place to the side. Then remove bolts from shock and upper control arm and hub nut to do this. Next, remove axle lock actuator on passenger side of

pull axle QU40221 19 Spline Outer Axle Shaft for 1977 to 1991 Chevy, GMC Corporate GM 10 Bolt Front Axle is a genuine original equipment outer axle stub shaft for all GM 10 Bolt front axles in 1977 to

...pull the pump blindly! (hard trick) now the book the WK jeep (05 up) its all here. for free, (I have the pay for links too, ask) ...

axle. front only you know this. are you asking all steps.?? if yes, there it is, in the official book, read that then ask questions. 10 steps starting on page 44 half-shafts removal. step 10 says. and