Questions & Answers for: pull cord sticking pressure washer

Ad

Question about WBSR3140DW Top Load Washer

2 Answers

...pressure of the water in the tank forces air through the tube to a switch which tells the pump to stop pumping water. If the tube is clogged the air cant get thru and the water overflows the washing ...

Ad

Question about Pressure Washer PSI 3000

2 Answers

pull cord broke HONDA 340 GX 11 HP PULL CORD BROKE REPAIRED BUT NOW WON'T START AND CORD WILL NOT RECOIL if you have not replaced cord you will need to do this,when you fit the cord turn the pulley 4 ...

Ad

Question about Pressure Washer PSI 3000

1 Answer

...pull cord. check the oil, is there gas in the oil? remove the spark plug and try to pull the cord again. gas may come out of the plug hole . if this is the problem you must change the oil and fix the ...

Question about WBSR3140DW Top Load Washer

2 Answers

...pull the power cord out. If when pulling the power cord out the water stops it means the pressure switch is bad. The pressure switch can be located inside the control panel. It has 2 wires and a ...

Question about WBSR3140DW Top Load Washer

1 Answer

...cord wont even pull like its stuck any suggestions would really help me tks.. This sounds like the pump has dead headed. I.e. the unloader valve is sticking. Unhooking all of the hoses should ...

Question about WBSR3140DW Top Load Washer

1 Answer

pull cord and look for sparking between spark plug and engine If you do NOT have any sparking, then coil is bad If you HAVE spark, then your spark plug needs cleaning or replacement If engine fires on

Question about WBSR3140DW Top Load Washer

1 Answer

pull start. Please Help :( Hi, W/D here. Try pulling on the starting cord while you are holding down on the trigger of the wand. A common problem with pressure washers is that the by-pass valve sticks

Question about Black Max 2600 PSI Pressure Washer

1 Answer

...pull cord jammed I'm not sure if this is an attempted repair or whether this just "happened" but here is my repair procedure. Jammed could be worn or dirty rope or rope improperly sized for ...

Question about Black Max 2600 PSI Pressure Washer

1 Answer

Pull cord not coming back at all. Can you turn the motor over by sticking your fingers under the recoil and move it freely. If not something is locked up, either the motor itself of the pressure pump.

Question about Black Max 2600 PSI Pressure Washer

1 Answer

cord will not pull the pistons unit is stuck . remove the sparkplug an spay in wd 40 or gas an let it set a day , drain then try to see if it will move. there are a lot more types of chemicals that ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1479 Answers

Marvin
Marvin

Level 3 Expert

84619 Answers

Brad Brown

Level 3 Expert

18060 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...