Questions & Answers for: pt cruiser oil sensor location

...2005 Pt Cruiser Non turbo gasoline IT IS LOCATED IN THE BLOCK BELOW THE STARTER..UNPLUG CONNECTOR AND 1 BOLT..IT MAY BE STUCK IN BLOCK..SPRAY WITH PENETRATING OIL..MOVE BACK AND FORTH PULL OUT OF ...

need location of crankshaft sensor-PT Cruiser 2005 It is located on the fire wall side of engine block just above the oil pan. Carefull as they tend to break in the block.

...pt cruiser The camshaft position sensor on an 04 pt is located on the right side of the engine, towards the top (looking at it from the front), directly in back behind the oil dipstick on a non-turbo ...

...pt cruiser near the oil filter.. above it...under exhaust manifold one small bolt holds it on. If the is a no start condition look for frayed wiring near crank sensor..... it has a harness that hangs ...

...PT Cruiser. Is there another possible location for the crankshaft position sensor?? around the bellhousing where it can access the flywheel is the most logical ,have you had a good look at the engine ...

need to install knock sensor on a 2004 pt cruiser turbo It is located below intake manifold, in front of your oil dip stick. It will be screwed into the front of the block.

...sensor is located just above the the oil filter, which is by the front of the engine, by the firewall.  I reached it from underneath the car.  There is one bolt holding it in

...PT Cruiser? It absolutely is not above the oil filter as on 01-03 PT's. REMOVAL - 2.0, 2.4, 2.4L TURBO The Crankshaft Position Sensor is in the front of the engine block just under the starter ...

...pt cruiser Recently had my blown head gasket fixed on my 2006 pt cruiser now my oil light keep flicker on and off when I'm at a stop light but will stop once I start back driving. Do anyone ...

Pt Cruiser Chrysler PT Cruiser crankcase pressure Questions ... - Fixya www.fixya.com > ... > crankcase pressure > Cars & Trucks > Chrysler Chrysler PT Cruiser cars & trucks crankcase pressure