Questions & Answers for: pt cruiser hard brake pedal

...PT Cruiser I removed all fuses to no avail, but if the battery is disconnected for a second an reinstalled the lights are off. Its hard to know what could be causing this, but in my chrysler there is ...

...PT Cruiser today and it won't come out of park. In the last month, I've noticed that it sometimes is hard to get it into drive/reverse, but this has never happened. We took out the console and there ...

...pt crusier i was replacing the lower control arms the back bolts arm spinning in the body . You may be able to cut a part of the frame and get a wrench on the nut. But professional help is what you ...

...PT Cruiser. However, when applying the brakes on a hard quick stop, it makes a god-awful griding noise. Doesn't do it with a "soft" stop or soft braking, only on hard brakes. Was really bad after a ...

PT Cruiser brake pedal will go in about an inch & stop like it is against something, with no brakes. It does this, one time, first thing in the morning when I back out of driveway & then it is

...pt cruiser this morning, the engine started and the tachometer revved to 2000 to 3000 rpms. The brake pedal was also hard to press down to stop the car. I drove the car and when I get to 3rd and 4th ...

...PT Cruiser and kneel down to locate the 16-point data link connector (DLC) under the dash. It sits up under the dash to the left of the brake pedal on earlier model Cruisers. Later models moved the ...

pt cruiser clutch diagram 5 speed manual. 2002 . Hard to get in and out of gear when engine running. Car moves forward when clutch to the floor in 1st,after the e brake disengaged. Is it a clutch or ...

...brake lines, changed vacuum booster as there was engine oil in the booster, replaced calipers. Man, you've spent some money without isolating the problem. Throwing parts at a problem is never a way ...

Hard brake pedal on 2008 pt cruiser Break pedal very hard to push to stop car , just started out of the blue.. the car stops by the pedal is very hard.. Sounds like the servo has failed.