Questions & Answers for: pt cruiser bad timing belt

Question about 2002 PT Cruiser

1 Answer

...pt cruiser just turned off on the high way ok i have seen this problem a lot in the last few years with these cars and every time it is the same thing. Check the timing belt, for some reson there was ...

Ad

Question about 2005 PT Cruiser

1 Answer

PT Cruiser timing belt Is there a suggested mileage for replacement of the timing belt on the PT Cruiser 2.4 engine? EVERY 90K

Ad

...PT Cruiser quit running driving down highway my 2001 pt cruiser quit running going down the highway. has not started since. we had some problems with the ignition switch so we replaced it. still did ...

Question about 2002 PT Cruiser

1 Answer

...PT Cruiser overheats after 2 miles, recently replaced water pump, thermostat, timing belt, water pump, and radiator Check your oil dipstick for coolant, or a mucky substance. Your symptoms sound like ...

...PT Cruiser timing Describe your 2002 Chrysler PT Cruiser Probl2002- what is required replacement for the tming belt, and is it interferance? Replace the belt at 100k with a new water pump pulley and ...

pt cruiser and the engine is making load rattling noise. Hopefully something is just loose and rattling around. The bad alternative is that the timing belt job was botched. I would not drive the car ,

...pt cruiser 2.4l timing belt wont turn on my 2005 pt cruiser 2.4l no turboengine will crank over belt is in good condition Try turning the crank with a socket and a bar. is the tensioner making enough ...

Question about 2002 PT Cruiser

1 Answer

...pt cruiser wont start after changing timing belt This is bad. The first question that i have to ask is did you time the engine before changing the belt? That being asked and assuming that your answer ...

Are there two different timing belts for a 2001 pt cruiser What is the correct number of teeth on a timing belt for a 2001 pt cruiser 146 or 150? 146 " it would be the orther 150 teeh with the turbo

pt cruiser.put back together can't get belt on power steering pump and ac pulley to stay on it screeches as if bad belt and comes of pulley.brand new belt.how can u tell if tensioner is bad or not put

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...