Questions & Answers for: protocol 4 channel radio controlled

manta quadcopter won't recognize the remote New product, led blinks slowly even after charging both batteries (remote and built-in) Turn on the remote controller first then heli the instructions are ...

copter is charged. it wont respond to the rc though rc has batteries.. it turns on properly Turn on the remote control first then the heli the instructions are wrong (I have the heli)

Manta Quadcopter will not take off Remote powers on, lights are on copter, light is lit constantly, indicating remote is paired with unit, but the unit will not take off or do anything. the ...

the wire to charge the quadcopter broke You can get a new USB charge lead for a few pounds from your supplier or Ebay.

...4 channel rc quad-copter will not calibrate properly Continuously will try to flip in one direction so will not hover- as if the stunt button was active - adjusting will not effect this. It is like ...

Intruder ufo won't lift up If it lifts steadily but has no height check the battery may be at the end of its life. HTH

Quad copter won't lift off ground It lifts off the ground and flies for a little bit and then slowly descends to the ground. I repeat preflight and it does it every time Maybe battery is not accepting

Hi my syma quadcopter x1 is stuck in the eversion how can i fix this ?? Thanks What is the issue with the quadcopter? All propellers spin but it flips over when trying to fly? This would be clockwise ...

...Protocol ToughCopter 2, i charged the heli for 2 hours and put fresh brand new batteries in the controller and the controller does nothing but flash the red light constantly. i have repla Everything ...

how to change flight mode from a 2 back to a 1 setting this affecting my flight control. Push the "Fine-tune Strafe left/right" (located under the right joystick) towards the right and hold it in ...