PROPANE DEEP FRYER I HAVE A DEEP FRYER THAT I AM HOOKING UP TO A CANISTER OF PROPANE. I HAVE ATTACHED THE CANISTER AND TURN IT ON BUT NO FLOW OF PROPANE TO IGNITE THE DEEP FRYER. THE PRODUCT ID UNKNOW
fryer wont stay lit one of our fryers keeps going out the flame as well as the pilot replace the thermopile
Imperial propane fryer won't stay lit. Pilot is on, fryer is hot, then the gas inexplicably goes out. No pilot, nothing. Help? check the high limit it tripping out
...not stay lit use a torch to simulate pilot flame and read milivolt. if ok then make sure pilot flame is fully contacting thermopile. also make sure thermopile wiring connections are clean and
...is soft. what should gas pressure be inlet and outlet to nozzle? Hi there. For propane gas fryer the incoming gas pressure must be 11 to 14" w.c. and the manifold gas pressure must be 10"w.c.
...stay lit. Can the valve be bad? Make sure the thermocouple is deeper into the flame of the pilot light. It needs to reach a high enough temperature to produce a high enough voltage to keep the pilot ...
propane fryer wont stay lit Probably the thermopile or thermocouple that senses the flame and holds the valve in the ready state.
...gas pressure written on the nameplate. Check also the quality of pilot flame, poor pilot flame quality will not properly heat up the thermopile which in turn will result in poor fryer
Question about IFS40 Deep Fryer
...fryer reaches temp. and shuts off theres still some propane seeping through becuuse the brass orifices will have a little flame on them we replaced regulator from propane tanks but that didnt ...
deep fryer propane that the pilot won't stay lit and when it lights the burners come on almost instantly. Even when the thermostat control is off. It will stay on until the oil is almost to temp. When
Usually answered in minutes!
378 Questions
257 Questions
252 Questions
238 Questions
190 Questions