Questions & Answers for: projector thermal event

...thermal event shut down due to thermal event. replaced fan and added new thermal paste. no luck. any thoughts? There can also be thermal sensors in your power supply, on your motherboard, and video ...

...projector shuts off. The thermal switch could be bad, but I'd say that there is a fan not working. A model number helps when asking what is wrong with your projector. hitachi cpx200 projector lamp ...

Thermal event and turn off There's a heat sensor inside the projector which will turn it off if it senses overheating of the bulb. Be sure the air vents are not blocked - there needs to be free air ...

...from a cool temperature location to a warm temperature location may result in moisture condensation on Projection Lens. In such an event, leave a projector OFF and wait until condensation

...projector and nothing will turn on. The two lamps just keep flasing what could be causing this? I loked at the lamp and it seems ok but I am not an expert Check Thermal Sensor or Thermal Switch and ...

...Projector, there are 2 thermal fuses (1 is in the motor and NOT replaceable and 1 is in the area of the lamp). Almost ALL Kodak projectors had 2 thermal fuses as described. You need to determine the ...

pc shut down due to a thermal event Dell T3612 Simple to Solve Previous Shutdown Due to Thermal Event and Sudden Shutdown try this link.

projector. These thermal protections could be in the form of a fuse (one shot, then it must be replaced) or a thermal circuit breaker (self-resets after a cooling-down period). A quick internet search

...or thermal sensor? if you projector auto shut down, and Lamp LED Light - Check Lamp - Check Lamp Driver - Check Main Board b. Temp LED Light - Check Thermal Sensor - Check Thermal Switch - Check ...

...thermal sensor hi when i start the projector power is green and the temp light is red which it says its the thermal sensor where can i get a thermal sensor and how to repair it thx wayne Fixya is not ...