...fan does run continuously on this projector however it should be running very very slow when the projector has completed it's lamp cool down routine. The reason for this is that a portion of the ...
Question about Digital Projector Vp6110 Multimedia Projector
...PROJECTOR LAMP SHUTS OFF All projectors are cooled by the use of a fan. The light chamber has its owned fan to extract the excessive heat generated by lamp. Check to see if this fan, close to the fan ...
...If that doesn't work get a small fan and place it near the projector to provide extra cooling. The projector is running border line on high temperature and just needs a little extra
...projector that fan stopped. what does that mean? hi, ur projectors lamp cooling fan have some problem. if the fan stopped the lamp will get over heated, that's why cooling fan is must. its a warning ...
Question about XGA Avanti Series LCD Projector Projector
cooling fan on a lc xa20? Projector turns off because off overheating and i cant figure out how to turn the fan on. If the cooling fan is not on, it is probably faulty and needs replacing or is jammed
...projector. 2 for LCD cooling 2 for lamp cooling 1 for power supply and lamp drive unit if any one is not moving, faulty, broken, than the problem occur. Experience: many times a broken piece of ...
...cooling fan of your projector. If the lamp cooling fan of your projector is faulty or it runs in a low speed this problem can occur. Another possibility is the faulty temperature sensor. you have to ...
...cooling fan of your projector. If the lamp cooling fan of your projector is faulty or it runs in a low speed this problem can occur. Another possibility is the faulty temperature sensor. you have to ...
...projector lamp while the cooling fan still operates on this model? While I am not sure of this feature on the Vivitar projectors, extensive testing has proven that running the cooling fan to ...
Question about U6-132 Projector
...cooling system does not work?How does the projector work? Make sure not to shut down the projector after use. Wait until the fan stops. The fan is to cool down the bulb during and after use. Once the ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions