Questions & Answers for: program dei remote

...DEI 471T model remote starter, it fires up than dies out immediately,than tries to refire, but wont run . its in a 1998 Ford taurus Could be one of a couple of things. Tach not programmed properly or ...

my dei your valet remote start turns the engine over but not long enough, its like just another 1/2 turn and it would start. what can be the issue? Check tack wire it has to be programed

...program remote: turn ignition on press and release programming switch once ( the siren/horn will honk once) press and hold programming switch while holding programming switch, press lock button on ...

start the car. Do you know what the process is to program the remote so I can use my car starter? Thank you so much for your time...Shawn http://www.retrevo.com/support/DEI-561R-manual/id/552dj492/t/2

program new remotes: turn key to the on position; within 10 seconds, press and release the programming switch one time. Press the switch once more and HOLD. While holding the programming switch, press

...switch will work. Then simply program your remote. As long as you have a DEI remote there should be no problem unless you are trying to program a two way remote (pager) to a one way system (non

...truck cranks and then loses the 12 volts once it is runnng. You may have the right colors from the remote starter correct but check to see if maybe from DEI they have the wires in the wrong

...remote starter manufacturers and, that these multiple manufacturers have different programming methods. However, the 12 minute run time is a default run time for Directed Electronics (Viper, Python, ...

...one of there systems is with a valet button. I would recomend that you contact a local install shop like Best Buy that works with DEI products. They likley will be able to program the remote for

...REMOTE START PROGRAM At this point in my life, I don't know what I would do with out my car remote. It should be an auto electrician that installs the system. As for the program, I am not sure. You ...