Question about KX-T7453 Corded Phone
...PROGRAM * * 1234(Default password is 1234. yours may have been changed) Press SP-PHONE 2 Times. To change the year enter the two digit year. If it is correct press FWD/DND to move the flashing ...
...button to save the settings Hit the hold button to exit the program then click on exit a couple times until you get back to the phone. didnt work... need help Hit the program button then * # 1234 ...
...these phone is connected to a TA 308 thanks If you lost the password the only way to get into programming mode is to reset the telephone system to factory default. If you are not accustomed to ...
Question about SeaChamp 1000c Recording Sonar Mapping GPS Receiver
...my new code was 4112 or 1234. 1234 is the new master code, 4112 is the installer code to get into programming. If you defaulted the panel, all previous zone programming is lost as well as reporting ...
i cant change the time on the phone You need to go into system programming Do Not lift handset Press * * 1234 ( or try *#1234) Enter 000 Use arrow keys to move cursor or press NEXT (in the screen) to ...
...intercom name and number? Changing the name and extension number can be done through system admin programming from a phone extension allowed by the class of service assigned to that extension by
I can't changed name on my phone. please help me. The extension names can be changed in admin programming from a predesignated programming phone. Typically this phone is the attendant phone as in ext ...
How do I change the time on my Panasonic KX-T7736 phone? The time can be set through system admin programming at an extension that has been allowed this ability, usually the attendant phone. To access
program key then **1234(1234 is the default system admin password). Enter 003 for the program code then enter. Dial the present extension number followed by the new extension number, then press enter.
Question about KX-TVA50 Voice Processing System
KX-TVA50 - forgot password. It is not 1234. How do I retrieve or change? entered 1234. haven't programmed system in a while. forgot password. Input password is capital letters ....INSTALLER (not As in
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
1,197 Questions
607 Questions