Questions & Answers for: proform xp treadmill incline

...treadmill speeds up. Can you tell me why. I have a Proform 625. PFTL62510KD. Where can I get a book for this treadmill? You can get a book by calling 1-800-999-3756. The treadmill you are usine in a ...

Treadmill has always been on a constant incline How can it be fixed so incline adjusts? Run the machine through calibration. If this does not work you will have either a bad controller or incline ...

...treadmill is acting strange proform xp542e incline doen't go all the way up or down it goes all over the place tried to reset the incline but it didn't work when the up and down arrows are pushed the ...

...treadmill (Pro-Form XP 550's) the incline keep jumping (slipping) and it does nothing else. Thudding sound like gear is slipping. there is a plastic spacer at the rack area on the incline mtr- this ...

...proform xp 580. when I turn it on, I have a proform xp 580. when I turn it on, incline noise comes on and won't stop unless I remove key or turn treadmill off. There is a line across the incline on ...

...Proform XP 650 E that the incline motor broke on. I replaced the motor, and now the incline is working, however there is now a strong vibration from the machine. On a side note, the lowest incline ...

...Proform XP 620 WeightLoss treadmill incline doesn't work. When I try to set the incline to any number, it jumps to 10 but doesn't actually incline. Any suggestions? 2) ...

proform xp 580 and my treadmill makes a clicking noise as if it is trying to incline what should i do? the treadmill wont turn off or reset i tried several times turning it off and on and to no avail.

...proform xp 550e was working fine till I Changed the walk belt. After changing belt, display looked ok but treadmiil would non trurn on. Operated incline. incline Treadmill would shut down when ...

...Proform xp 550 the incline won't go up...it was starting to go up then made a noise and it dropped down ... how do i fix it? i have a Proform xp 550 the incline won't go up...it was ...