Questions & Answers for: proform 650 crosstrainer treadmill problems

motor is running but belt isnt moving how do i adjust the belt This is caused by one of three problems. First and most likely, the walking belt is loose. To tighten the belt, start by locating the two

treadmill stuck on highest incline....and motor running...but seems stuck...won't come down If the incline is stuck, it could be a problem as simple as the gearbox on the motor being jammed. Unplug ...

pro form 450 cx keeps blowing fuse in plug top when i incress the speed it blows fuse in plug top .i checked under cover and everthing looks ok cleanded out the dust Measure on the hot DC lead ...

...proform treadmill is not working and now I can't get the treadmill to start, it just keeps inclining up and down ICON CALIBRATION INSTRUCTIONS- INCLINE 1) Press the Stop and the Speed Up keys down ...

treadmill belt keeps slipping, i cannot run on it without feeling like i'm going to fall down. Your unit has likely one of 2 problems. It most likely needs a new motor belt installed. The micro V belt

my proform 545s keeps blowing fuse. worked a coupla of weeks first time I replaced it , now blows as soon as I turn it on 1) Lube the deck belt use 100% silicones or wax, read your instruction manual ...

treadmill turns on but turns itself off I turn on my treadmill, it starts at a high speed, then turns itself off. The display also rests. This may be a problem with the LCB.