Questions & Answers for: proform 625 treadmill belt

...Proform 625. PFTL62510KD. Where can I get a book for this treadmill? You can get a book by calling 1-800-999-3756. The treadmill you are usine in a cheaper model. the motors on those units are not ...

...ProForm 625 and the belt has started to slide to one side. How can I fix it? Check the rear end cap. (end where the adjusting screws for the belt are) check for cracking around the screws they have ...

Proform 625 belt runs very slow and stops when I get on treadmill. Have to crank speed way up just to get belt moving. No slippage,odor or odd noises. Any ideas on cause?? proform 625 belt slips cause

Treadmill 625 EX Wide Trac When we program the mph's we are unable to set the desired mph, the speed either increases or decreased and will not stay set. 1. You may have a worn belt and deck problem (

...Proform 625 that was doing the same thing. It was a speed calibration issue. When I ran the calibration, the max speed went to 11.7mph - it was only supposed to be 10mph. All it took to fix was ...

proform 625 treadmill that slows or stops after 1 minute. I did what was suggested and cleaned the speed sensor and even adjusted it closer to the pulley. The motor also still hums when it stops. If I

What kind of lube should be used for the bearings and walking belt of a proform 625 treadmill? 1) for deck belt use 100% silicone LUBE 2) for bearing use WD-40 Or similar. God bless you