Questions & Answers for: problems poulan chainsaw clutch

Poulan Wildthing 18" chainsaw 2375 sprocket/drum replacement How do you remove and replace the sprocket/drum/bearing on a Poulan Wildthing 18" 2375 chainsaw. Thanks, Hi tchild, my name is Dennis Gladx

...Poulan chainsaw. It's the kind Wal Mart sells. It's worked great for about five years. Today, the chainbrake stopped working. When I crank the saw, the chain runs. It was for no apparent reason. Is ...

...chainsaw chain, moves even when the engine is at idle. the chain moves at quite a rate. what is the cause of this problem Three choices Your idle is set to high or your low speed jet is set to high ...

...chainsaw_chain_installation All poulan chainsaws can be found here: Poulan.com http://www.ordertree.com/modelinfo/POULAN-WEED-EATER/75.59.html The dash number of your serial number is the type. If ...

...Poulan Pro #sm4218av. My problem is the clutch drive is locked and won't release The bearing between the hub mechanism and the outer drum may have seized. Try spraying some WD-40 into the bearing and ...

Poulan PRO chainsaw -- oil is not getting to bar...what could be the problem? You need to remove the bar and chain, clean out all the oil delivery holes in the bar, if no better drain the oil tank, ...

...Poulan Pro 260 42cc chainsaw because the stud for the clutch brake housing has broken loose inside the housing. When turning the clutch brake nut the clutch brake stud just turn with the clutch brake ...

i need a replacement part for the clutch drum of the poulon pro 42cc 2 cycle chain saw 18. where can i cource that part and the cost. I have never had a problem getting parts from Small Engine ...

...poulan chansaw will not fun when i pull the trigger. The chain lock in not engaged. can someone help me. Dont mean to be rude, but are you sure the brake is off? make sure you can pull the hand guard ...

...chainsaw problem given in the below details? Saw starts good and runs good, but as soon as the blade is put on on wood with even the lightest pressure, blade stops turning and the engine sounds like ...